01327 857991
Monit brake bias adjuster has a digit display to aloow the user to show either relative bias to the front or rear or absolute position can be selected if for instance you wanted to connect it up for suspension adjustment.
The adjuster as a detent that clicks every 1/4 turn to ensure positive adjustment.
The dial is powered by a CR2032 which should last around 18 months and is easily replaced by removing the 2 screws on the front of the adjuster.
The Bulkhead mount adjuster has a M20 thread on the back and the Square Mount has 4 x 3.5mm holes.
Kit Contents:
The kit comes with the following parts
1 x Bias adjuster
1 x 1.5M adjuster cable
5 x Cable clamps
2 x Direction Labels
2 x Balance Bar Adaptors - 1 x 7/16" UNF and 1 x 3/8" UNF
2 x Jam Nuts - 1 x 7/16" UNF and 1 x 3/8" UNF
1 x T5 Torx Screwdriver
BD01-1-OR BD01-1-BK BD01-2-BK BD01-2-OR
Monit Brake Bias Adjuster
(0)
