Welcome to Competition Supplies|Register|Sign In
My Account|Saved Items|
VAT INC
VAT EX
VAT EX 
|
£
Pound Sterling GBP
Euro EUR
£ GBP 
|Basket £0.00 Ex (0)
Home > Clutches > Tilton Metallic Competition Clutches > Tilton 7.25" (184mm) Cerametallic Rally Clutch 
  

Tilton 7.25" (184mm) Cerametallic Rally Clutch

From £470.79 Ex

Description

Tilton 7 1/4" (184mm) cerametallic rally clutches are available as either single or twin plate designs, with a selection of different diaphragm springs and to fit either step type or pot type flywheels. We also offer two pressure plate ratios the standard high ratio plate is the better option for most applications but  we also stock Ultra High Ratio versions if required.
Cerametallic or rally clutches utilise a driven plate which is thicker (7.1mm) in comparison to the sintered driven plate clutches. These paddle type driven plates which although a little heavier are smoother engaging than the thinner sintered plates and their greater mass gives them a little more heat capacity. The clutches benefit from Tilton's longer finger diaphragm design which allows them to be used with either a conventional 52mm contact bearing or for better performance a 44mm contact release bearing. This reduces the pedal effort required to release and improves the modulation to facilitate better and more consistant starts. The one pieces aluminium clutch basket is of an open "lug drive" design which allows the clutch to run cooler and cleaner than A-ring type clutches whilst the drive is transmitted to the cover via forged steel thrust buttons fitted in the legs, a more reliable and durable method than the thin stainless wear clips favoured by other manufacturers. These units are quite simply the best of their type available! Driven plates should be ordered seperately and are available in a huge range of spline and hub options. The clutch selection notes below should help you to choose the most appropriate version, but if you would like to discuss your specific application then please contact us.

Please Note:  Driven plates are not included and should be ordered seperately, please click the associated products link below to view,  a massive range of spline sizes and configurations are available from stock, if you are not certain of your requirement please contact us for assistance.
 

Pressure Plate Selection

Flywheel Fitment

 
SPECIAL OFFERS
Special Offer
Spend between £100 and £200 and get UPS delivery for £4.50+VAT **UK CUSTOMERS ONLY**
Special Offer
Spend more than £200 and get Free UPS delivery **UK CUSTOMERS ONLY**
Diaphragm Spring
Flywheel Fitment
No. of Plates
Pressure Plate
Quantity
Please enter your gift voucher details
FROM REQUIRED
RECIPTIENT REQUIRED
RECIPTIENT EMAIL REQUIRED
DATE REQUIRED
MESSAGE (OPTIONAL)
Diaphragm Spring, Flywheel Fitment, No. of Plates, Pressure Plate are required
Add to Basket
RECENTLY VIEWED


Tilton 7.25" (184mm) Cerametallic Rally Clutch